RCU Forums - View Single Post - Brison 4.2 loading up on the down lines
Thread: Brison 4.2 loading up on the down lines
View Single Post
Old 06-21-2005 | 08:50 PM
  #5  
Big_Bird's Avatar
Big_Bird
Senior Member
My Feedback: (1)
 
Joined: Dec 2001
Posts: 4,258
Likes: 0
Received 7 Likes on 7 Posts
From: Arlington, TX
Default RE: Brison 4.2 loading up on the down lines
Sure glad to hear that it works much better. I assume that the sharp pull up is near idle. You might try leaning the idle about 1/8 turn and see if there is an improvement.

Ken
Big_Bird is offline  
Reply Like