Finished mine up and flew it today. It flew pretty nice. I need some time to get used to it, but I think it is going to be a good flying plane. I had Hitec 5945s in it, but 2 of them were acting funny so I took all of the aileron and elevator servos out and replaced them with some reliable JR high torque servos. I am going to send the 5945s in. I used all the stock hardware, it is all good stuff. The spinner is really nice too. This plane came out heavier than I hoped at 17 lbs. I could knock weight off that if I removed my pilot and used Lions instead of my Nimh batteries, but I have already dumped a bunch of cash in it, and I am not spending more. Took me a while to cut all the graphics for it, but it turned out well. Here are some pictures.