after looking through my manual it dont say anywhere about puting nuts on any of the horn.. says nothing about nuts on ailerons, but on page 13 for the elevator in the discription of what needed it says 2 8/32 flange nuts, but in the pictures and instructions nothing.. but when you get to rudder page 26 if not using a pull pull there is no mention of the nuts but in the picture there is but here is the problem.. i only recieved nuts for the rudder in a pull pull. no other 8/32 flange nuts were provided.. I think im going to step back and go get some flange nuts and put on all of them. that is the last thing i need