well i picked up a jato today my first nitro rc, and while breaking it in it kept cutting out so i thought okay i will adjust the idle speed so i did and i turned it all the way clockwise so i could turn the needle back and know where i am at, well i dont know if thats what did it but i think i torqued the needle too much and broke the carb, it wasnt running at the time, and i fired it up later to see if it was a fluke and it ran great, but fuel poured out of the bottom, did i destroy the carb or was it something else? i felt a slight spray coming from the general area of the fuel line, but i hear it wouldnt work at all if that were the case because of the pressure running through that line, the fuel comes out of the exhaust and the bottom of the chassis below the engine sort of, thanks guys.