RE: U-Can-Do 3d 46?
gjeffers,
I need some advice. I have flown my ucando 5 times and dead stick landed everytime. I have a new saito 100 with a new OS f plug, Wildcat 30% fuel. The high speed needle seems ok. IT is at @1 3/4 out. RPm @ 9800 with a 15/6 MAS prop. The engine would idle good on the ground and transition well. It seemed to go through a tank fast. @ 5min. When I would idle back in flight for an extended period of time it would quit. On last flight I leaned low speed @ 1/8 turn and it still quit at idle while flying. Do these engines need an on board ignitor, or do I just have a tuning problem?
Thanks,
Tom