I would also say the formosa is a good choice. It flys good, and is very stable. Ive got the large EPP foam one that is all molded, not the flat depron 3D indoor ship. Its a nice flying plane.

Its an outdoor only plane. If you build the big formosa, get a 6ch reciever. Install retracts in it, its already got the cut outs in the wings for it, and use TWO aileron servos so you can program flaperons or spoilers.

Its not much of a 3D ship, but if you just want a smooth flying sport plane. Its a good low-wing flyer.