I recently purchased a US. Air core Colt .40 off of E-bay. The kit was started, The fuse was done and the wing was unstarted. After looking thru the kit i noticed The 2 Main wood wing spars were missing. No problem they will be easy to make. But I need a liitle help from someone who has a new in box kit. I would like to know if you would be kind enough to measure the spars so i can make an exact copy. As you know this kit is mostly plastic ,but the wing spar that you insert thru the wing is wood,and thats the piece thats missing. Your help would greatly be appreciated! Thanks so much, SHELLYDOG