Hi all,

Flew the CMPro Giles 202 1.40 again at the weekend with an 18x6 prop. Big mistake as I'm only getting 7,800 out of it. This gives me more thrust but a very low top speed (45mph ish). I'm going for a 17x8 next as I really felt the 18x8 was just a bit too much prop.

The plane flew fine though and I love the way it KE's and stall turns with that huge rudder.

For anyone htinking about building one of these, I'd really recommend a digital servo for that rudder. If I had the dosh, I'd have them all round.

Must try and get some in-flight shots soon (it's always a bit difficult holding the camera in one hand and the tranny in the other though).