cruzmissile

Congrats on you purchase of the BCP and you killer skilz. It took me a little longer to get the hang of it since I had no prior RC flight experience and no one in my area (that I know of) that could teach me. Everything I have learned came from these wonderful forums and trial and error. (lots of errors..LOL). But anyway I noticed in your pic that you have your ant. wrapped around the CF tail boom. Have you had any glitching problems? When I first bought my BCP I did the same thing and all of a sudden I started having the glitching problems in flight. It was more noticeable at about 5 ft. away and further. It got a little scary at times. Anyway, I started looking around the forums for similar problems and found out the the glitching was being caused from the ant. being wrapped around the boom. Some thing I did not realize was that the Carbon Fiber causes interference problems and therefore causing the glitching. I moved my ant. off of the boom and everything worked fine again. There was no more glitching. If you were having any problems or start having this problem then I hope this helps and saves you troubleshooting time. The less time fixing problems means more time in the air!!! Anyway, great job on the quick advancement and hope all goes well. These lil Heli’s ROCK!!!


Dan