Hello guys, I have a Goldberg Sukhoi that I'm trying to get the dual elevator servos set up. Un fortunally my Airtronics VG6000 radio will not allow you to adjust or reverse the servos independently. I had Airtronics reverse the throw on one servo for me and put them in the plane. After setting zero the low rate on both servos were perfect at 1 inch travel up and down. On high rates one servo was perfect at 2 inches up and down but the other was 2 1/4 up and 1 3/4 down. Is this something I am going to haft to live with and if so how much is this going to effect the performance of the plane. Any help will sure be appreciated. Have a good day everyone.