Is their a picture of this or something.
My Brison 2.4 was starting good for over 100 flights. Now, it is impossible to start without putting raw gas directly in the carb. I have gone to 3 flips and starting to 20 minutes of flipping and starting. When it starts, it runs great. Just hard to start!
Originally posted by rcign
The cover with one screw in the center is the pump side, the diaphragm goes against the carb with the gasket on top..The other side is the inlet needle side, 4 screws, gasket against the carb and the diaphragm on top...