I'm fairly new to electric and just bought my second set set of LiPo's and would like to standardize my connectors. Airplane is a Reflection with a Rimfire 22m-1000 and 3-cell liPo's. I believe it is pulling around 6 amps continuous and maybe 8-9 in bursts. My present GP 640 mah 3- cell has a JST connector on the charge side and I believe a "micro connector" on the discharge side going into my 8 amp ESC. I just bought a couple of new packs and would like to know if I could modify the whole setup to use JST connectors ( my new batteries are equipped this way ) - this was my plan until I just read that they would only be good to 2-3 amps. If they are not heavy enough, what connector would be recommended for this setup?
Thanks