ok thanks every one will do the repair with hopefully ultra coat as sugested , have simalar tape here called "hundred mile an hour tape" cause it stays put at a hundred miles an hour, used by lots of race car outfits to keep damaged spoilers together.As far as ARF go's the local Model shop is aproxamatly 800miles away seperated by aprox 300 miles of water called Bass Straight, so options for help in setting up a model were limited , have since found a club aproxamatly 2 hours drive away,launceston model club but due to 2 busted disks in my back, driving that far has sever consequenses for me. Untill I found this web site I have been going it alone, getting a ARF was one realy great option to get into the hobbie as the last model I fully built was about 18 years ago and you had to cover wings with paper and aplly a dopping agent to get the rigidity to the covering, but that was then and this is now. So I thought I was doing allright to get a maiden flight in and two subsequent flights without crashing it by myself. ARF in my opinion will not be the end of the hobbie here as with the sucess of my efforts 3 of my mates have ordered planes as well, so as we progress in this little area we hope to get into all facets of model building and that willl include from scratch models as we get more confidence in our abilitys to assemble these planes.In the end it is all about the flying and the great feeling that goes with a sucsesfull build and subsequent flights.Without this forum we'd be up the creek in a barbwire canoo without a paddle. So to that end Thank you to everyone for their wondefull advise
It truely is appreciated.
Best Regards Mick