I'm trying to charge my first Li-poly pack, a Tanic 3 cell 2500 mAh using a new Hobbico Accu-cycle elite and the charger only got to 1600mah before stopping. How do I get the battery fully charged to 2500?

Do I have to use the Tanic Taps for each cell and if so do I set the charger to read one third of the packs total amperage for each cell charge. For example for one cell would I set the charger to read 3.7Volts and 800mah or maybe 850mah. The charger does not seem to have a setting for single cells but it does allow for changing the voltage.

Thanks for any help

Mike