RCU Forums - View Single Post - Rewiring a 7.4V Lipo to 11.1V, possible/
Thread: Rewiring a 7.4V Lipo to 11.1V, possible/
View Single Post
Old 12-10-2005 | 05:40 PM
  #3  
clearconcepts
Member
 
Joined: Feb 2004
Posts: 62
Likes: 0
Received 0 Likes on 0 Posts
From: Creston, IA
Default RE: Rewiring a 7.4V Lipo to 11.1V, possible/
You have four 1700mah cells in this pack.

So you can make a 3s or 4s 1700mah pack if you want. Configure it however you want.

But be advised that many lipoly cells have aluminum tabs so you need special solder and flux for them. And as mentioned you need to be able to make nice clean quick solder joints.
clearconcepts is offline  
Reply Like