RCU Forums - View Single Post - My Lanier Laser 200 33%
View Single Post
Old 12-17-2005 | 08:48 PM
  #18  
Nogyro's Avatar
Nogyro
My Feedback: (10)
 
Joined: Nov 2001
Posts: 2,712
Likes: 0
Received 0 Likes on 0 Posts
From: Puryear, TN
Default RE: My Lanier Laser 200 33%


ORIGINAL: texomalaser

. Im kinda running into an interesting problem with it though. On my upline's the plane tracks straight up with fullpower. Doesnt want to lean to the wheels or canopy. But.....On the downline it wants to pull out (toward canopy) Im going to try and play with the ailerons and see if i can get it out but at the same time I am afraid that will change the way it tracks going up. I think I would rather fight it going down than up..Anybody have any Ideas what could cause this?[]
My WH 28% Edge was doing this also. Just by chance I ended up changing mufflers, moving batteries around, and ended up being a bit more tail heavy than I was before. Well that solved my problem! No more pulling out towards the canopy on the down lines, and the up lines are still dead on. It holds a 45 degree climb hands off, but it does seem like I have to push just a tad on the elevator stick when landing.