RCU Forums - View Single Post - Arf Quality
Thread: Arf Quality
View Single Post
Old 12-23-2005 | 11:28 PM
  #8  
Bumstead's Avatar
Bumstead
Senior Member
My Feedback: (2)
 
Joined: Jul 2003
Posts: 254
Likes: 0
Received 0 Likes on 0 Posts
From: Louisville, KY
Default RE: Arf Quality

Don't know about your experience with Raidentech ARF's but here's a horror story.
I wanted a throw in the car electric Cub, saw one on Raidentech's site for $55 + shipping.
Couldn't be that bad right? WRONG!
Everything was wrong from the start. The manual has a split elevator shown but the fuse has two tube for pushrods.
One for elevator, the other for rudder. It shows wooden pushrods, none supplied or useable with the fuse.
Box shows a Yellow Cub, mine is a Blue Decathalon "sort-of" covering.
Wheels axles were three sizes too big, struts won't fit, the clevises don't have a chance at fitting. It has
been a joke. What a waste of money. I could elaborate all the other misfitting, wrong junk, lousy manual
but I'll spare everyone the whine