RCU Forums - View Single Post - E-FLIGHT BLADE CP
View Single Post
Old 12-25-2005 | 02:58 AM
  #1527  
skywca
Junior Member
 
Joined: May 2005
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
From: tucson, AZ
Default RE: E-FLIGHT BLADE CP

Any suggestions? I'm not really ready for the 3D upgrade kit and I'm not sure I am ready to make the financial commitment to LIPOs, but would a motor upgrade work with the stock NiMH? If so any suggestions?
sjw985;

I haven't flown heli's yet, but I think the LiPo upgrade may be worth it. I don't know the extent of your background in electric, without taking measurements of Power In vs. Power Out, the difference to me seems to be as follows:
8 cell 9.6V x approx. 6 amps = 57.6 Watts
3 cell 11.1V x approx. 6 amps = 66.6 Watts

The Power increase would appear to be approximately 16%. The tail rotor should be more responsive as well.

Perhaps after the holidays some of the Blade Drivers will share their experience with the battery upgrade.