ORIGINAL: elenasgrumpy

Carrellh, I also have an Airtronics receiver & 3 standard size Airtronics servos. Give me a chance to check them out & make sure they are ok. They are about 10 yrs old, but had all of about 2 min flight time when my brother found out you don't just grab a TX & go out & fly. They have been just sitting there in the wreckage ever since. I got the wreckage last week & pulled the radio out of it & tossed the sticks in the trash. The receiver is on Ch. 26, the servos cleaned right up & look new. To my amazement they have the later model style connectors like we use today on them. I'll make sure they're good & let you know. Then all you would need is 1 more servo, & a matching Crystal. Like Ken said let us know if you need any of the little things that don't come with the kit. I still have some misc. building stuff laying around. Fuel tanks, goldenrod, pushrod stock, variuos connectors etc.etc.etc. I may have some new wheels laying around too. So when the time comes, let us know what you need.

Mark