Guess what folks? I have figured out the problem. OFNA has misprinted their manual for the Violator. The part number that they have printed in the manual for the CNC knuckle hop-up is the wrong part number. The WRONG # they have listed in the manual is 36516. The correct # for the part is 34001. If you go by the manual and order 36516, you will have a heck of a time trying to figure out what is wrong when you try to install them, like me. [>:] Then you will have to send the part back and order the correct ones, thus incurring multiple shipping charges and a lot of time wasted, not to mention the frustration. When I spoke to a tech. at OFNA he simply stated yeah, the manual is wrong, sorry. I said, "well, now I have to ship back the wrong part and re-order the correct parts."
Again the tech. replied, "I'm sorry". What a waste!