RCU Forums - View Single Post - I am starting to hate 3d flying
View Single Post
Old 01-18-2006 | 11:09 AM
  #38  
mu2driver's Avatar
mu2driver
My Feedback: (15)
 
Joined: Oct 2003
Posts: 2,126
Likes: 0
Received 1 Like on 1 Post
From: lake havasu city, AZ
Default RE: I am starting to hate 3d flying


ORIGINAL: mwarren400


ORIGINAL: mu2driver

Imac flying is harder then hovering...i dont have a problem with either at our field, as long as its not done over the pits..like a lot of trainer I see...

I say if people want a challange then go try to fly a straight line, in the wind, both ways...if that isnt enough add a 8 pointer with a snap and a half in there...that oughta give them a little respect..anyone can hover, hell my 2.5 year old can hover

You may be right...it is certainly a challenge to be precise. However, I've never had someone say to me "Do that perfect loop again!!" or "Wow...that Reverse Cuban 8 was AWESOME!" However, do a tumble into an inverted flat spin...inverted harrier down to the deck ...hover...tail touch...then do a rolling harrier followed by a harrier landing and you will definitely get some ooooh's and aaahhhhh's

I can 3D with the best of em' ...I get a crap load of ooohhhh's and aaahhhh's ...but when Im practicing my Seq.. I also get so many people come up to me and ask how I am able to fly the same pattern with precision...

Problem I have seen is most people that Stick Jam think its nice 3D...when you can fly precision and throw in a Few planed manuvers you are good in my book...anyone can bang sticks..