RCU Forums - View Single Post - mold making problem
Thread: mold making problem
View Single Post
Old 01-18-2006 | 07:54 PM
  #8  
dclancey
 
Joined: Oct 2004
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
From: , CO
Default RE: mold making problem
Prepare your plug like normal, wax, PVA etc. then pour the tooling epoxy over the plug about 1/8" thick. This is followed by the thickened sand and epoxy mixture to build up the mold. Hope this helps.

Doug
dclancey is offline  
Reply Like