RCU Forums - View Single Post - Electrified LL Vendetta Q40: IT MOVES
View Single Post
Old 02-20-2006, 01:08 PM
  #7  
cobratraxxas69
Senior Member
My Feedback: (31)
 
cobratraxxas69's Avatar
 
Join Date: Dec 2003
Location: Fullerton, CA
Posts: 434
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Electrified LL Vendetta Q40: IT MOVES

In case any of us wanna build this bad boy here are the specs:

Neu 15/15/2y
Hacker 135-O-F5B
This was only the 2nd prop I've tried. It was a 7.4 X 8 APC Carbon racing.
Three EVO 3700's. IE: 9s1P. This is definitely enough duration. The most I've replaced of 3700mah was 2200mah after flying for 7 minutes. Full throttle about 65% of the time. Usually I back it off on downwind then come by us full-on.
JR 770 receiver. (THat reminds me of something else. I don't advertise for anyone but ever since I put a JR 770 in one of my small F5D's and never got a hit, I have continued to put them in every plane I own. In the Vendetta, the aileron servo wires run right over battery wires and the receiver is about 2 inches from the main power output from the speed control. I have not had the plane do one thing that I did not ask it to do. There was not enough room to do much else and luckily it has been flawless.
And a STRONG/AND FAST Servo on the elevator. It is tough to move the elevator very far and I only have one elevator servo on there (unlike my others) so I didn't skimp.
Oh yea...I'm running a 5-cell receiver pack. I love how fast the servos are on 5-cells.