Thanks everyone for the additional info -

I got the engine mounted up on the stock mount simply by going to the LHS and finding a bolt without a hex head on it, but a flat head instead. I now have about 1mm between the heads of each bolt when everything is fastened down.

I finished all the remaing steps of the build. I had kinda skipped around a little bit where I could since I was missing a few details and items here and there, but it's 98% done now. All I have left is mounting up the GP fuel filling kit I bought and drilling one last hole on the cowling.

I need to update my pictures, but here's what most of it looks like:

http://www.waynelansdowne.com/galler...lbum=21&page=2


Saturday morning will be spent breaking in the engine at the field - not flying, but on a stand. Maiden will be either late that afternoon or Sunday morning.

I'll report back with how everything goes!

- Wayne