This post is probably going to be the shortest post that I've made in this entire build thread. This is just a simple follow up to the last post where we mounted the landing gear wire. Next we'll mount the wheels to the main landing gear. Nothing complicated about this because it's exactly mounting the front wheel. We'll use an inner and an outer wheel collar to hold the landing gear in. As with the front wheel make sure the wheels turn freely, but aren't too loose. Pictures #1-#3 show mounting the wheels.

Pictures
1. Mounting the wheels to the main landing gear.
2. Tighten the set screws in the wheel collars
3. Mounting the wheels to the main landing gear


Until next time

Ken