Hell Raiser
 

Check this out!

RE: Hell Raiser
 

that would look cool torque rolling in the kitchen, did you make it, can i have plans, is it a kit?

span? weight?

RE: Hell Raiser
 

Hi,
32" span AUW is 11.5oz w/ Axi 2208/34 and a 3 cell 340s.
Its a kit!

Mike

RE: Hell Raiser
 

This kit is of awesome quality and buidls great and straight forward. Mucho mas stronger then it's comepetitors. Building one right now fellas. I'll report back once finished.

RE: Hell Raiser
 

Saw one at SEFF, pretty cool looking plane, never saw it fly though. Did anyone else see it?

RE: Hell Raiser
 

I ve been flying them for 4 months now.
Flys as good as it looks!

BTW, It won best new product at SEFF!

RE: Hell Raiser
 

Be afriad!! The Hell Raiser has been released on the public.
http://www.hobby-lobby.com/hellraiser.htm

RE: Hell Raiser
 

Once you fly it you will be hooked!
Thats what happened to me, I flew one the other day and now I just have to get one. It handles so well I forgot I was flying a foamy!
Rickc

RE: Hell Raiser
 

I'm going to purchase one of these. Anyone care to share/recommend a motor and battery config?

Thanks,
-Jeff

RE: Hell Raiser
 

Jeff,

Hobby Lobby ha a recommended config on their website for this which includes axi motor, esc and so on. I believe the demo video they have shows it performing quite impressively on this setup.

RE: Hell Raiser
 

I watched the video. That's why I want the plane. You think the video was with their recommended setup?

RE: Hell Raiser
 

Hi Jeff,
The Video shows the recommended set-up. I designed it just for the Axi !
You can get the kit direct from me or Hobby-Lobby if you need the whole set-up.
I only sell my kits not the motors and stuff!

Glad you like it,
Mike Glass

RE: Hell Raiser
 

I was there when they shot the video and yes it was a our stock setup. I have personally flown the Hell Raiser in the video and it has lots of verticle and it will slow down to a crawl as well. Snaps are very cool as well.

RE: Hell Raiser
 

Really nice Bipe, although it is four to five ounces AUW heavier than a Shockflyer. Anyone flying it recomends other motor than the Axi 2208/34 , maybe the Axi 2212 , or the 2208 is the right set up.

RE: Hell Raiser
 

Aeroman,
I designed it for the 2208/34 and that is the set-up flown in the videos!
Some guys are putting the 2212/34 in because it was what they had around!
I think the 2208 has more then enough power, plus you can use smaller cells.

Mike Glass

RE: Hell Raiser
 

Guys,

I was looking to buy a bipe and stumbled across this beauty . . .

I live in the UK - how can I get one? Are there any uk distributors or will one of the shops send over sea's just worried about import tax - they look wicked ! ! !

RE: Hell Raiser
 

I shipped a few Hell Raisers to the UK already.
I am the manufacturer. www.horseflyhobbies.com
Its not on my site yet!

Mike Glass

RE: Hell Raiser
 

I want one very bad, how can I get it? Tried Hobby Lobby and they are out.

RE: Hell Raiser
 

I went to the horseflyhobbies web site , but there is no information on the Hell Rasier.

RE: Hell Raiser
 

We should have our next batch in pretty quick. These things are like AXI motors, if you want one you almost have to back order it.

RE: Hell Raiser
 

JPB111,
The Guy that set-up the my site is too busy to put the HellRaiser on the site!
So I am in the process of making a new site! For now guy have been PP me at
[email protected] or send a check or MO to the address on the contact page
on the site!

Mike

RE: Hell Raiser
 

Thanks Mike, already placed an order with Hobby Lobby.

RE: Hell Raiser
 

well, almost finished. It's going together really nice with no surprises. I am just too slow of a builder. You guys will love it. I will be putting two aileron servos (cirrus 4.4) on the ailerons so I can have flaperons. Why ? Because I can :D ! Will use Pico servos on elevator and rudder.
I for example will use a AXI 2212/34 with 12X3.8 APC Slo Fly prop and Phoenix 25 ESC. Battery will be a 3S Predator 880mah and 1100 mah (from Falcon Batteries) and a I-rate 1100 mah pack. Let's see which one I like the best. Like Mike metioned I am using this motor because I already have one. Should be awesome power if it comes in around 11-12 oz.
I'll report back with some pictures and flight report. Hang in there.

RE: Hell Raiser
 

Well, Ulf, I got one. I had to have something to put these Axis in :D But I'm using the 2212/26 and Irate 1100's. Nothing like a little excess horsepower to soothe the soul.

RE: Hell Raiser
 

yes sir. good to see you got one too (I mean a hell raiser ;)). Have you started on it yet ?
the axi 2212/34 and the 2212/26 should pull them around nicely. There is no such thing as too much power when keeping within weight range. :D