RCU Forums - speed control

RCU Forums (https://www.rcuniverse.com/forum/)

- 3D Electric Flying! (https://www.rcuniverse.com/forum/3d-electric-flying-237/)

- - speed control (https://www.rcuniverse.com/forum/3d-electric-flying-237/6162369-speed-control.html)

oren10

07-27-2007 06:50 AM

speed control

how do i plug this speed control http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXKBF5 to battery to discharge or to charge?

jzrf6c

07-27-2007 08:53 AM

RE: speed control

Don't connect the ESC to a charger EVER. Connect the battery to a seperate charger for cycling (charge and/or discharging). The Red plug (called a Dean's plug) is set to connect to your battery (Red is positive, Black is negative). The other wires connect to the motor. This is a "brushed controller so there are only two wires to the motor. It really does not matter which one is connect to which wire on the motor.

Hope this helps.

oren10

07-27-2007 03:35 PM

RE: speed control

the dean's in the speed control i put into the dischsrge or chsrge on the battery

oren10

07-27-2007 03:41 PM

RE: speed control

last question do the speed contro is good for 370 brusehd motor?

jzrf6c

07-27-2007 07:32 PM

RE: speed control

The Dean plugs into the Battery. Yes this should be ok for a 370 brushed motor. But, to make sure check to see the maximum current draw is less than 35 amps.

oren10

07-29-2007 12:46 PM

RE: speed control

someone can tell me if the speed control is good>?

All times are GMT -8. The time now is 02:46 AM.