extra 300 3d capablities
10-12-2003 | 10:35 PM
#1
Thread Starter
Member
Joined: Sep 2003
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
From: labrador,
NF, CANADA
extra 300 3d capablities
I have an extra 300, 68 inch wingspan with a 90 supertiger on it.I was wondering if it was 3d capable right out of box or do I have to do mods?
10-13-2003 | 12:55 AM
#3
Senior Member
My Feedback: (1)
Joined: Sep 2003
Posts: 3,775
Likes: 0
Received 0 Likes
on
0 Posts
From: surrey,
BC, CANADA
RE: extra 300 3d capablities
Wingspan does not reveal much.Questions like these need alot more info to be answered for you.Kit Manufacturer? Kit? ARF? Weight?
But just guessing I'd say that motor would be on the weak side.Some extras are for more sport flying and some have been tweaked to do well in 3D
But just guessing I'd say that motor would be on the weak side.Some extras are for more sport flying and some have been tweaked to do well in 3D
10-13-2003 | 04:20 AM
#4
Senior Member
Joined: May 2003
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
From: Moscow, RUSSIA
RE: extra 300 3d capablities
I rebuild my Goldberg extra 300. Enlarged elevator, rudder & ailerons. Total weigt - 7.7Lbs. Engine - OS91FX. This plane fully 3D capable. WS - 68".
Now i build Seduction 90. I`m not use retracts. Wing, ailerons, elevator partialy sheeted (original - full sheeted all surfaces). FG cowl, enlightened fuse, CF undercarriage. Weight decreased from 8.3 to 7 lbs. Engine - YS 91. WS - 68".
Now i build Seduction 90. I`m not use retracts. Wing, ailerons, elevator partialy sheeted (original - full sheeted all surfaces). FG cowl, enlightened fuse, CF undercarriage. Weight decreased from 8.3 to 7 lbs. Engine - YS 91. WS - 68".
