I wanted to know which is the best 3D airplane for a 100 cc. engine ? I have several options but I want to hear more opinions.
Thank you

There is no "BEST", but there are a lot of good options.

Any Carden 35%
AEROWORKS 33% Edge....the kit is better than the ARF but they don't make the kit any longer (I know where you can get one)
CA 34% Extra
Hangar 9 CAP. They have a new EXTRA, but most 100cc engines won't fit in the cowl without cutting holes for the plugs


There are LOTS more, but it just depends on what you want.

You should look at the Wild Hare Extra 330. Joe hunt has some pretty good videos on his site.

www.downonthedeck.com

I putting together a 34% CA Extra right now. Using DA-100 for power. Very happy so far. Should fly in a month or so.

Ryan

I agree with Southern_touch9's recommendation for the WH 35% Extra 330. They fly very light and can do any 3D stuff you are capable of. I liked my 1st one so much that I bought a second one so I have another one set up the same as a spare. Can't say enough about WH's customer service and construction quality either.

I like my AW 33% Extra ARF and they 're on sale now .

epc.

Thank you all for yours answers, I'll have in mind what you say when i take the decition.

There are about a billion theads on this subject. Without very detailed comments on finances, engine to be used, what is to be expected out of the plane and personal flying experiance.

This post is a waste of time