ok guys after talking to some people about the choice i was advised to use the cap to fly the imac
an the edge for 3D
i thought my cap was awesome at 3D so i was unsure but i have decided to do it so this is what i came up with

H9 cap OS 1.60 w/ 3 blade mezjlic 16.5x11
H9 edge saito 180 2 blade 18x8 30% heli

an for anyone that did not understand i meant a light edge by replacing the landing gear w/ carbon fiber lightened back plate
an i replaced everything with titanium hardware


PS. RCU I FEEL FOR U FOR THE SIN U HAVE COMMITTED BY HAVING TO LET THE RC ONLINE TRASH CLUTTER YOUR GREAT SITE BUT LIKE THEY SAYU CAN TAKE THE TRASH OUT OF RCO BUT U CAN TAKE THE RCU OUT OF THE TRASH

Mr. Master3D,
I thought, with your new heading, that you would try to get answers, by starting with a new and better attitude, and then you still end the post with a suicidal footer.
Dude, you have to wise up just a bit, and possibly look for the missing keys on your keyboard, but that's just secondary.
Why in the world would you run a three bladed prop on anything of that size, unless it's to be scale. Run an 18x6 or 18x8 on the OS, and a 17x6 or 18x6 on the Saito. If the Edge slows down real well, even try a 16x10 for some throttle induced TR.
DKjens

They let you in...

but if its for sequence why is it so bad i have a buddy that flys his 3w extra 40% he flys three blade to keep it quiet but it still flys so nice what is it thats so bad i cant sacrafice

an why is everyone so worried about periods. i used them in school. where i was graded . i cant seem to figure while the hell u guys are so worried im treating u like kids u complain i do it more

mr. master does the cap 3d better then the edge?

havent finished the edge yet

I gotta say that reading "master's" posts, is quite entertaining...

They don't contain much info, but give me a much needed guffaw...

well im glad someone can have fun like me all these guys are uptight

ROCK ON BROTHER

ONLY NANCYBOIS AND LITTLE GIRLS COMPLAIN ABUOT BAD SPEELING AND NO PUNCTATION MARKS WE'RE TALKIG ABOUT RC PLAYNES AND AREOBATICKS AND I.M.A.C. AND 3-D FLYIG HERE FOR PETES' SAKE'S ALL YUO FOLKS WOT WANT TO GRADE PEOPLE'S WRITING SKILLS GOTO COLLEGE AND GET YUOR TEACHING DEGREE

OH AND TYPING IN ALLCAPS IS COOL

Phew! That was painful.

Oh man this is entertainment :bananahea :rainfro: :devious:

Master3D,
On your friends 40% a three bladed prop makes sense, but on a 1/4 scale you shouldn't really have a noise problem, and the smaller the planes are, the least efficient the +2 bladed props are compared to 2 bladed props.
I am just wondering, why you want to run a three bladed, it is more expensive and less efficient, and just gives you 1" better ground clearance.
And why do I want to try and write as correct as I can? Well, call it trying to get the point across, hoping people read what I am trying to say, without misunderstandings.
I think even you, Master3D, acknowledge that it's much easier to read something that's broken up in sentences, and has capitol letters "here and there".
DKjens

Master of 3d.......I think you should change your name to......"want to be ...master of 3d"...

I am by no means a master of 3d...but even I know that.....

1....you will never get that edge down to a weight where a 180 saito will give you truely unlimited 3d !!

2....the maximum prop for that engine in 3d is an 18/6...no matter how much nitro you run !

ONLY IDIOTS CAN BE SO DUMB I SAID NOISE IS NOT IN QUESTION AN THATR IM FLYING PATTEN SO THE PERFORMANCE LOSS IS NON ISSUE I HAVE AN OS 1.60 PLENTY TO SPARE AN FOR THE OTHER STUPID PEOPLE I HAD THE 180 IN MY FIRST CAP AT 13 PDS AN WAS UNLIMTED 3D ON 30% SO I THINK THE OVER A POUND LIGHTER EDGE WOULD BE FINE SO AGAIN FOR ALL THE STUPID PEOPLE WHO KNOW EVERYTHING THAT MAKES ME A GENIUS CAUSE I ASK QUESTIONS AN ITS A SHAME I STARTED FLYING AT CHRISTMAS AN CAN FLY BETTER THAN SOME OF U FOOLS CAN LIE ABOUT FLYING

thats it... Ive been trying to decide if I should send my kids to a parochial school, or a public school. Observing the grammar and language in some of these posts has encouraged me to pay for the former ...

Master of 3d...how old are you? Just curious

Mr Moderator..... Must we continue to let this "Master of 3D" continue to post on this wonderful site? I think in his few posts he has proven to be unable to stick to his topic and avoid the things that this site tries to avoid. You are obviously going to have to close this post just like his last one and I would imagine with his attitude, most of his future posts will turn out like this one... and this crap is just uncalled for . Grammar is not that important, not everyone has the same level of smarts. But attitude is something that can't be helped. Who is with me on this?

Really.....please inform us how you came to that conclusion. I would be more than willing to put my skills against yours

Perhaps he's a natural.
I'm not going to take the bait on the "only idiots can be so dumb" line. No challenge. Anyone can do it.

Reach for the stars!

Well I can see that this thread is serving no useful purpose so it is now history, unless someone can show me that everyone would benefit from me opening it back up.