Trying to decide on a 3D model... need help!
04-25-2004 | 04:37 PM
#1
Thread Starter
Member
Joined: Dec 2003
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
From: Kyle, TX
Trying to decide on a 3D model... need help!
Hey guys,
I have been reading post after post on this subject... Here is the situation.
I have an os .46 and a .50 heli laying around. I am looking at the Funtana, UcanDo, Flip and the Razor... what do you think would be my best choice, or is there one with the engines that I have in stock?... I would like something with a light wing loading and that would be easier to handle in a more confined field..
THX,
Myron
I have been reading post after post on this subject... Here is the situation.
I have an os .46 and a .50 heli laying around. I am looking at the Funtana, UcanDo, Flip and the Razor... what do you think would be my best choice, or is there one with the engines that I have in stock?... I would like something with a light wing loading and that would be easier to handle in a more confined field..
THX,
Myron
04-25-2004 | 07:44 PM
#2
Joined: Sep 2003
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
From: HENDERSON, TX
RE: Trying to decide on a 3D model... need help!
Out of the ones you listed, I would recommend the Flip or the Funtana. I dont even think the Razor looks like it would fly the way they claim it will fly. Also the Ucando generally comes out to heavy to get any decent performance with either of the engines that you listed. I haven personally flown the flip but it looks like more of a 3D trainer than the Funtana. In other words the Flip looks easier to fly. Another ARF that has gotten a few good reviews is the new H9 Twist. If you dont mind building a kit then either get the Morris Hobbies Sledge or any of the OMP profile kits. All are very good choices.
