Just looking for some info.
05-31-2004 | 11:07 AM
#1
Thread Starter
Joined: Oct 2003
Posts: 2,065
Likes: 0
Received 0 Likes
on
0 Posts
From: Paducah, KY
Just looking for some info.
I purchased a UCANDO 3D and a saito 91 to go along with it. As maiden flight date comes nearer i realized I've never seen a UCD in action. Any one have any vids of it? What are the specs on your UCD .46? Thanks
05-31-2004 | 11:21 AM
#2
Senior Member
My Feedback: (3)
Joined: Mar 2004
Posts: 641
Likes: 0
Received 0 Likes
on
0 Posts
From: Waunakee,
WI
RE: Just looking for some info.
RCU has an online review of the UCD with some videos.
Mine's got a Saito .91 in it with an APC 15x4. Hitec servos all around - 425s on the ailerons, 525s on the elevator halves and a 5625 digital on the rudder. All controlled with a Futaba 9C. Central Hobbies carbon fiber pushrods, flying wires tieing the stab to the fin and bottom of fuse, and fillets on the stab to fuse junction(top and bottom). CG at 5-1/4 from the LE. CA hinges replaced with Dubro pinned and I'm also using a Du-Bro quick-fueler valve.
Only have 3 flights on it, the weather here has not been cooperative at all[:@] So far I'm pleased with how it flies.
Mine's got a Saito .91 in it with an APC 15x4. Hitec servos all around - 425s on the ailerons, 525s on the elevator halves and a 5625 digital on the rudder. All controlled with a Futaba 9C. Central Hobbies carbon fiber pushrods, flying wires tieing the stab to the fin and bottom of fuse, and fillets on the stab to fuse junction(top and bottom). CG at 5-1/4 from the LE. CA hinges replaced with Dubro pinned and I'm also using a Du-Bro quick-fueler valve.
Only have 3 flights on it, the weather here has not been cooperative at all[:@] So far I'm pleased with how it flies.
