RCS 140 and 3D
07-07-2002 | 11:00 AM
#1
Thread Starter
Junior Member
Joined: Jan 2002
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
From: West Lafayette, IN
RCS 140 and 3D
I really think this is a cool engine. However, I don't know if it has the power/weight for 3D. Does anyone know of a plane it would be good in for 3D?
Jimbo
Jimbo
07-08-2002 | 01:03 AM
#3
Junior Member
My Feedback: (1)
Joined: Jul 2002
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
From: Eagan,
MN
RCS 140 and 3D
I am currently flying the RCS140 on an Aeroworks .90 size Edge540T ARF. 65" wingspan, weighs about 11.5lbs. Flies great. Turning an APC 16x8 prop at 8400rpm on the ground.
07-08-2002 | 01:12 AM
#4
Member
My Feedback: (2)
Joined: Dec 2001
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
From: Porter, TX
RCS 140 and 3D
I have one on a Goldberg Extra 300 at 9-3/4 lbs I have unlimited vertical , turning a 16-8 at 8500
it will TR , however the goldberg does not appear to be a great choice for other 3d ,it becomes very unstable close to stall speeds , at least thats been my experience
it will TR , however the goldberg does not appear to be a great choice for other 3d ,it becomes very unstable close to stall speeds , at least thats been my experience
