u-can-do 3D 60, need building tips
06-30-2004 | 07:40 PM
#1
Thread Starter
Junior Member
My Feedback: (1)
Joined: Jun 2004
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
From: N29-05-48 W111-02-56 ,
AZ
u-can-do 3D 60, need building tips
Tomorrow I'm going to buy this plane, I'm going to use an O.S. .91FX with a 15x6 APC prop.
I wanted to know what construction steps you modified/improved/etc. I read someplace else that it's better to not put the engine inverted (I've never had problems with this), that the landing gear needs to be beefed up and that the tail feathers should be glued to the fuselage.
So whad'ya suggest?
Thx.
(I know this has been discussed in other threads but I'm looking for fresh ideas)
I wanted to know what construction steps you modified/improved/etc. I read someplace else that it's better to not put the engine inverted (I've never had problems with this), that the landing gear needs to be beefed up and that the tail feathers should be glued to the fuselage.
So whad'ya suggest?
Thx.
(I know this has been discussed in other threads but I'm looking for fresh ideas)
