I have a A/W 29% edge with a brison 3.2. Can anyone send me their setup for the radio. "Data Safe" I cannot get it to torque roll but it will hang. I am using a 20x10 menz prop. The help would be appreciated.

If you are talking about throttle curve, its easier to describe than send to you settings. Here is my process, that takes about 30 seconds to 1 minute, sitting on the flight line...

Go to 18 on the touch screen (this is with the engine running and someone holding the plane).

All servos hold- touch yes.

Move the throttle to half stick then hit store, then "-" til the curve comes down. Start by moving it down about 10 %.

Next, move the throttle to about quarter stick, hit "store" then hit the "-" button to bring that point down some.

Touch the "EXP" on. then enter.

Now test out the trottle curve to see how the engine "feels" as you advance the throttle. You can repeat the above steps to get a nice linear feel on the throttle stick. With a nice linear throttle feel, you'll find that your torque rolls are much easier to control.