27% CA Models Extra vs. Texas Hurricane
07-20-2003 | 10:49 PM
#1
Thread Starter
Joined: Nov 2002
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
From: Mississauga, ON, CANADA
27% CA Models Extra vs. Texas Hurricane
Hi FOlks,
For those of you who have actual flying experience with these two models, could you comment on their 3D capabilities? I have the 27% CA Models Extra with a DA50 and I am looking for something more stable in elevators and harriers.
Thanks,
Steve
For those of you who have actual flying experience with these two models, could you comment on their 3D capabilities? I have the 27% CA Models Extra with a DA50 and I am looking for something more stable in elevators and harriers.
Thanks,
Steve
07-23-2003 | 06:58 PM
#2
Thread Starter
Joined: Nov 2002
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
From: Mississauga, ON, CANADA
27% CA Models Extra vs. Texas Hurricane
Hi Folks,
No replies in a few days so I going to try a different question. How does the Hurricane perform in elevators and harriers? I'm looking for a decent 3D plane / test mule for my DA50. I have the 27% Extra and I'm not overly thrilled with it in 3D. Maybe it's just how I have it set up.
Steve
No replies in a few days so I going to try a different question. How does the Hurricane perform in elevators and harriers? I'm looking for a decent 3D plane / test mule for my DA50. I have the 27% Extra and I'm not overly thrilled with it in 3D. Maybe it's just how I have it set up.
Steve
07-23-2003 | 07:17 PM
#3
Senior Member
Joined: Jun 2003
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
From: Walled Lake, MI,
27% CA Models Extra vs. Texas Hurricane
Well, I personally don't have much experience with larger planes, but I've been told that the aeroworks 31% edge 540 is a nice flyer on the da50. If it will do what you, I have no clue... but it's something else to look into.
07-30-2003 | 01:58 PM
#4
Thread Starter
Joined: Nov 2002
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
From: Mississauga, ON, CANADA
Texas Hurricane
Hi Folks,
I decided to take my DA50 and all the gear out of my 27% Extra and put it into the Texas Hurricane. Really impressed how it went together. Had to shorten the motor box about 3/4" for the DA50. Also mounted the servos on the outside of the fuse and wings rather than bury them inside.
I'll let you know what I think of the Texas Hurricane.
Steve
I decided to take my DA50 and all the gear out of my 27% Extra and put it into the Texas Hurricane. Really impressed how it went together. Had to shorten the motor box about 3/4" for the DA50. Also mounted the servos on the outside of the fuse and wings rather than bury them inside.
I'll let you know what I think of the Texas Hurricane.
Steve
07-30-2003 | 09:45 PM
#5
Member
Joined: Dec 2002
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
From: Stockholm, SWEDEN
Re: Texas Hurricane
Originally posted by sarawnty
Hi Folks,
I decided to take my DA50 and all the gear out of my 27% Extra and put it into the Texas Hurricane. Really impressed how it went together. Had to shorten the motor box about 3/4" for the DA50. Also mounted the servos on the outside of the fuse and wings rather than bury them inside.
I'll let you know what I think of the Texas Hurricane.
Steve
Hi Folks,
I decided to take my DA50 and all the gear out of my 27% Extra and put it into the Texas Hurricane. Really impressed how it went together. Had to shorten the motor box about 3/4" for the DA50. Also mounted the servos on the outside of the fuse and wings rather than bury them inside.
I'll let you know what I think of the Texas Hurricane.
Steve
