RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   3D Flying! (https://www.rcuniverse.com/forum/3d-flying-82/)
-   -   Big Hots (https://www.rcuniverse.com/forum/3d-flying-82/11049832-big-hots.html)

skaife.j 04-20-2012 07:32 AM

Big Hots
 
Recently scratch built a Big HOTS looks great can't get it to balance very very tail heavy used suggested woods any thoughts out there?

daveopam 04-21-2012 06:48 PM

RE: Big Hots
 
Longer motor mount?Pushing the engine out will help a bunch.

Steve 04-25-2012 05:26 AM

RE: Big Hots
 


ORIGINAL: daveopam

Longer motor mount?Pushing the engine out will help a bunch.
+1

2wingedpilot 04-25-2012 12:53 PM

RE: Big Hots
 
I had one years ago. It had a G62 in it. Seemed to take a small amout of lead upfront. The lightest fix would be to shim the motor farther out.

rmenke 04-25-2012 07:37 PM

RE: Big Hots
 
Skaife:

Saw my first "Hots" in 1972 at a AMA pattern contest in Madera, Ca. It got some attention as the "Novice" class pilot flew it around all over the place on knife edge. I remember it well because I had to fly against a couple of guys by the name of Phil Kraft and Joe Bredi and got my butt handed to me at the end of the second day. Both guys were nice and cordial, we spent a few hours on the tail gate sucking up some suds.

The Hots has always been tail heavy from day one. I think to work with the heavy "Webras" of the day. Keep it as light as you can, move the motor forward until you get your CG. Good luck!! ENJOY


All times are GMT -8. The time now is 12:10 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.