RE: easiest plane to hover
 

Noboby mentioned the YAK54 profile from ohio model planes! You might want to take a peek at it at www.ohiomodelplanes.com

RE: easiest plane to hover
 

I found the H9 Ultra stick to be very easy to hover and torque roll with a 91 fx:)

RE: easiest plane to hover
 

My Hangar 9 Ultimate is the easiest hovering airplane I've flown.. but it's not for everyone.. hehe. Costs a bit more than the 3D SPAD airplanes.

RE: easiest plane to hover
 

i wood go with the people that said spad 3d as it sounds that your are not real experenced with 3d yet these are the best thing since sliced bread they are easier to hover than any plane out there i have both ucan dos funtana freestile suduction and they are tuff and you can look on ebay and get one for about 20 dollors

RE: easiest plane to hover
 

Yes, the Ohio Model Planes Yak 54 90 size is extremely easy to hover. Just like it's brothers the Edge 540 funfly and the Giant Scale Edge Profile, these planes were designed to be extremely stable in all the 3d manuevers. With a .91 OS motor these planes will hover at 1/2 throttle.

Salmon

RE: easiest plane to hover
 

be carefull with Model Tech, I have a giles 202 and the balsa is extremly soft. I had to add flying wires to the stab because it broke 2 times on both sides. The plane is a bit heavy too.

RE: easiest plane to hover
 

:D[:-][sm=idea.gif][sm=bananahead.gif]

RE: easiest plane to hover
 

Spa3d!