Funtana prop
 

I keep knocking the tips off my apc 14/4 making them more like 13 1/2-4 props, so I bought an master screw 13/6 what can I expect better or worse performance?
Thanks

Dave

RE: Funtana prop
 

I have a Master airscrew 13x6 on mine, works great.

RE: Funtana prop
 

With 15% fuel mine likes the 13x4W APC. I have run the APC 13x6. It's a good all around prop. For instant thrust It's hard to beat the 13X4W. I fly a Funtana and a Pizzaz. The pizzaz even came to life with the 13x4W.

David

RE: Funtana prop
 

Here in Brazil i´m not finding 15x4 prop and i´m just about to put a 15x6 on my Saito 100. What do you think??

RE: Funtana prop
 

I used the 15x6 on my Saito 100 before I got my hands on a 15x4W. The 15x6 is a good prop.

RE: Funtana prop
 

Daveopman what moter are you running Im running a saito 72

RE: Funtana prop
 

I am also running a Saito .72. My favorite prop on it is the 14x4W. Mine just wont give good throttle response without 30%. I would like to try the 14x4W Zinger. I just have not found one. If you can get your .72 to pull the 14x4W on 15% your ahead of me.
I fly at 2,000' and maybe that's the problem.

David

RE: Funtana prop
 

3Ddave,

I'd say your custom 13.5x4W should work fine, as long as you rebalance it after every 'shortening event'.

If you're whacking the outside 1/4 inch off the prop tips from ground strikes, you already know, but you can get taller carbon-fiber gear that will give you a bit more prop clearance.