Seduction is finished! (pic)
 

It's finally finished! Will fly it tomorrow. I'm so excited! Too bad the trans purple doesn't show up at night. :(

Seduction is finished! (pic)
 

I had a question, but you already answered it! LOL

But do tell what the particulars are as far as radio gear and prop selection..I'm sure a lot of guys are highly interested!!

And what did you do on the wing tips..they look trans purple too...

Plane looks great! You did an excellent job.

Seduction is finished! (pic)
 

Servos are all ht 425bb except throttle, 81. I used RC car paint on the wing tips, Candy Purple. Was going to do the canopy too but my airbrush is too fine and I couldn't get it even on that big of a surface. Used white car paint on the cowl also. It's designed to be used on the inside of clear lexan bodies and resists fuel. Got a 12x7 apc on the ys 63. 11.5k leaned out.

Seduction is finished! (pic)
 

Nice work h82crash,
what is the total weight? did you do any Ono modifications?

Seduction is finished! (pic)
 

I'm almost done with my Freestyle. I am really impressed with the construction, weight, and how well things align by design. Pics to follow. Anve any of you seen one fly with the blue transparent monocote? I was planning on using the trans blue, but have heared it's difficult to see in the air. Any comments?

Seduction is finished! (pic)
 

tmproff
I have blue transparent monokote on my funfly. It certainlly is no as visible as yellow or orange but not bad either. It looks beautiful with a combination of opaque white or yellow!

Seduction is finished! (pic)
 

No mods yet, but I do have two pieces of 2" trailing edge stock thanks to ChuckAuger. I'll have bigger ailerons soon. :D Don't know the weight, only epoxy I used was joining the wing. Screwed up and used the 1.5mm sheeting for the turtle deck and bonnet so it might be lighter but those areas are weak and I must use extra care handling my model. When building, the thinnest sheeting is 1.5mm and is for the wings. The 2mm is for the turtle deck.

Seduction is finished! (pic)
 

h82crash


Nice work,

Hope you enjoy the aircraft as much as I do.. Cat looks p***ed off though!!!! let him out...

How did you attach the canopy, I screwed mine...

Let us know how you get on.


Cheers

Kris

When are You Flyin It.....
 

Tom......GREAT JOB.....OH WOW....

WHEN,WHEN,WHEN,WHEN,WHEN,WHEN,WHEN,WHEN,WHEN,WHEN, WHEN,WHEN,WHEN,WHEN,WHEN,WHEN,WHEN,WHEN,WHEN


:D
:D

SCOTT

Seduction is finished! (pic)
 

Canpoy is glued on and ultracote trim on the front edge. And Scott, going after I shower. Almost forgot, I did glass the wing joint, maybe added a half oz or so..

Seduction is finished! (pic)
 

I just want to bust!!! I am having to wait till July to even order mine!! I plan to use my Saito 56 cause money is almost non existant in Arkansas. We are all poor and bare foot ya know!! Please let us pesents know how it flys!!! :D

Seduction is finished! (pic)
 

Not to mention that your family tree doesn't branch!!!! :)

lol, I cant wait to go home tonight and sheet my wings...it's almost finished!!! Muhahahah

Seduction is finished! (pic)
 

Hay tmproff, have you ever used "Rich's Brew" fuel? They are in Houston too. I have been using his stuff for years, and really like it. His 25/20 Heli blend is awsome in my engines, 2 & 4 cycle.

daytime pic
 

Great maiden flight! A few clicks of right aileron and off we go. Did a knife edge spin and some waterfalls. Didn't want to get too carried away, only 30 minutes on the engine. It's kinda plain, would love to have those graphics. I got the pdf files from the Pilot web site, just need to find a printer who will print on clear vinyl with ink thats fuel proof. Just don't really care to spend a whole lot.

Most excellent!
 

Glad to hear it went good! Look forward to hearing anything else about it when you get some more flights on it.

Seduction is finished! (pic)
 

Yeah, I use 10% Riches Brew quite often for my Irvine, but use Torquemaster for my Saito's. Also, anyone interested in getting the graphics for the Seduction, you can email Randy at:

[email protected]

All graphics are $35 shipped...I'm planning on getting them

Seduction is finished! (pic)
 

Nice Seduction you have there. Have fun flying it

Seduction
 

:D Hey guys we just finished our Seduction FF this morning and test flew it in the park down the street. It flew great only needed a few clicks of down trim. Needs some left rudder in the harriers and some right rudder in the waterfalls. we will try to get some pics soon.
Have fun Chris & Rod.

Seduction is finished! (pic)
 

I flew my seduction for the 4th time yesterday. I was having problems with the CG and some elevator linkage, but it flew pretty nice. I am still working on the incidence on the wings....

Seduction
 

:( our seduction seems like it is heavy for its size it wants to drop the right wing sometimes. it is very quick though.

Seduction is finished! (pic)
 

Mine came out around 4.5 lbs (little added weight due to putting the battery in the tail). This plane will hover at 1/2 throttle.

seduction
 

ours came out at about 4 pounds with a 46fx it will hover at around half throttle also. can anyone help us find the CG on the Seduction FF?

Seduction is finished! (pic)
 

h 82 Crash......

Were you capable of 3D with the 425 BB servos or are they too slow ? let me know...........by the way ur plane is a beauty.....happy flyin with it........

cool
 

:D we flew our seduction 3 more times today and got a little more use to it and found out we love it!!! on the third flight our friend was fling it and the rudder striped and stuck w/some left in it. he did a very good job of saving it though. he likes it a lot too!
ya, it looks great and flys even better, will try to get pics soon.

Seduction is finished! (pic)
 

h82crash,

Could you please tell me the control throws you are using on everything? Also wondering how much slop you've got in everything.

How do you have your wing held into the slot at the LE?