![]() |
Shocky action!
1 Attachment(s)
Check out my rockin' shocky action this afternoon! THis is with the 3DPowerset brushed motor and an Etec 1200 3s1p LiPoly.
Shocky photos by X PastyWhiteBoy X...nice job, John! |
RE: Shocky action!
1 Attachment(s)
More...
Including X PastyWhiteBoy X's Morris TopCap..pic by me... |
RE: Shocky action!
Whats on the shocky ailerons in the middle? What was the magical combo to making it hover?
What is that big white thing in the center of the TopCap?;) |
RE: Shocky action!
1 Attachment(s)
lkijghfd!!!!!!
|
RE: Shocky action!
It's that POS motor you sold me that's flown apart twice so far and that 3 cell LiPoly
|
RE: Shocky action!
that big white think in middle of the top cap would be courtesy of aaron! 3Dfanatic did it!
|
RE: Shocky action!
define flown apart twice:eek:
|
RE: Shocky action!
First the hub that the prop ruberbands to came off the drive shaft while hovering in HobbyTown's asphalt parking lot. Splat. Damn. John was kind enough to make me a deal on foam safe CA :D Then friday morning, I was flying in my backyard and the whole drive shaft came out of the gearbox and i sorta glided into a cherry tree (good catch tree!). John Wondra kindly climbed the tree to retreive it :D
And yes, I sortof deadsticked John's TopCap and sorta hit a little hard... [:o]:eek: |
RE: Shocky action!
sorta eh? try 2 pirces dangeling by some monokote [:-] and no worries im gunna dork that plane sometime or later i just abuse it. its the plane i like to beat up
|
RE: Shocky action!
It wan't THAT bad :eek:
|
RE: Shocky action!
you and johnvh made fun of me about teh pizza plane and so now its my turn to rub some salt in your wound! hehe we all got our talents electrick is not one of mine. hehe
|
RE: Shocky action!
Truedat :D
|
RE: Shocky action!
Great pics. I'm hoping to have one of these next winter so I can get some flying in at the local civic center gym. Looks like fun.
|
RE: Shocky action!
theres a new vid of my shockflyer on www.3drc.info ... nothing spectacular to some of the shocks around, but i made the big mistake of using 16g servos, i cna honestly say that every gram helps!
|
RE: Shocky action!
Where is that big hall welsh?
Looks like it flies pretty well even with bricks for servos;) |
RE: Shocky action!
it fliers ok but you can only get about 30 secodns hover before it needs a short break... that's the problem... also the tail is twisting so much the knife egde turns are almost impossible in a hurry... you use elevator and it juast screws out... i'll sort that out on my nerw one though.
Did you notice i accidnelty included the saem clip 3 tiems in that video? lol The hall is our local ice rink... costs £120 for a few hours. |
RE: Shocky action!
the shockys fly the best with hs 50's of hs 55's
|
RE: Shocky action!
They are awefully slow, I have the MX30's in mine, fast!
|
RE: Shocky action!
slow? the hs 50 is .09 but your servoes are good too
|
RE: Shocky action!
55 is .13. That's way faster than your JR digis ;) I wouldn't put 50s in it. They're kinda low on torque. 55s are .28 ounces. Gramify that.
30 seconds??? Whaaaaaaaa? I fly 4.5 minutes of hovering with only a few seconds out of that to get all screwed up and reenter... |
RE: Shocky action!
This plane would not fly with my digi's, at 2.24oz each, way too heavy, not to mention big.
|
RE: Shocky action!
I know, but your saying my 55s are slow. Those 8411s are snails :PPP
|
RE: Shocky action!
not really.
|
RE: Shocky action!
you are comparing apples and oranges both fruit! but no the same friggen thing........
|
RE: Shocky action!
Oh lighten up [&o]
|
| All times are GMT -8. The time now is 10:02 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.