RCU Forums - DA200 for TOC!

RCU Forums (https://www.rcuniverse.com/forum/)

- 3D Flying! (https://www.rcuniverse.com/forum/3d-flying-82/)

- - DA200 for TOC! (https://www.rcuniverse.com/forum/3d-flying-82/291610-da200-toc.html)

Mayur

09-28-2002 05:52 AM

DA200 for TOC!

Will Chip Hyde be using DA-200 on his Ultimate Bipe????!!!!!!

Check this out...

http://www.aero-works.net/planes/ult...percent/15.htm

Four Cylinders! WOW!!

mecam

09-28-2002 06:29 AM

DA200 for TOC!

Anybody know the wingspan on that Ultimate?

stomper

09-28-2002 09:13 AM

DA200 for TOC!

I want one!
GO DA

3DMike

09-28-2002 12:18 PM

DA200 for TOC!

4 DA 50's.. cool!! Im sure if its reliable enough and provides a greater trust 2 weight ratio than the 150, he will be using it. On other hands he doesnt want to find the teething problems halfway through his freestyle.... Im sure JAS will be able to answer that question. Are any other pilots testing with the 200???

robert

09-28-2002 12:32 PM

DA200 for TOC!

I have one in my fun-fly design, 15:1 power to weight ratio, it can prop hang at about 7/8 throttle. If I prop it right, I get unlimited verical.

The engine would probably prophang at idle actually....

coolbob140

09-28-2002 01:51 PM

DA200 for TOC!

i believe it when are they going to offer anodized cases?

rvd	09-28-2002 02:27 PM

DA200 for TOC!

wow That engine sure looks great! I guess there isn't any specs on it yet. I would love to see that baby in action.

Shortman

09-28-2002 10:41 PM

DA200 for TOC!

thats a nice looking engine

willembad

09-30-2002 05:31 PM

DA200

Hi all,

What's the black wire going from behind the spinner to inside the motor box?

Any ideas..... :confused:

ilikeplanes

09-30-2002 05:48 PM

DA200 for TOC!

Why are the wings so thin and sharp?

Chris 540

09-30-2002 06:27 PM

DA200 for TOC!

What is up with all this ARF crap?

robert

09-30-2002 06:55 PM

DA200 for TOC!

I know....

mecam

09-30-2002 07:22 PM

DA200 for TOC!

I think by next year, you will see more ARFs in the 35%~40% scale.

robert

09-30-2002 07:26 PM

DA200 for TOC!

Remember when they used to all use home designs in TOC?

Quickie

09-30-2002 08:01 PM

Re: DA200

Quote:

Originally posted by willembad
Hi all,

What's the black wire going from behind the spinner to inside the motor box?

Any ideas..... :confused:

Most likely the secondary pickup. Looks like they are using a seprate pickup for each bank of cylinders. I'm probably wrong though :D

RSands

09-30-2002 11:30 PM

DA200 for TOC!

Is that typical duct work? As tight as it is, I'm sure any air that's going in is being used, but it doesn't look like much air would travel through the cowl.

willembad

10-01-2002 12:35 AM

Black wire?

If you're referring to a second timing sensor, I believe using one to be the best idea. All 4 pistons are pushing the same crank, so you'd think they would be timed by one sensor.

Any other ideas?

Willem

All times are GMT -8. The time now is 01:49 AM.