RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   3D Flying! (https://www.rcuniverse.com/forum/3d-flying-82/)
-   -   Harrier Rolls (https://www.rcuniverse.com/forum/3d-flying-82/2997260-harrier-rolls.html)

shakway 05-21-2005 04:13 PM

Harrier Rolls
 
Hey guys !

I've learned to do Harrier Rolls lately but I only use elevator can anyone explain how rudder is used also? It is hard to use both at the same time...

Thanx

Not24 05-21-2005 08:10 PM

RE: Harrier Rolls
 
Get a simulator and do them as slow as you can fly. If you do not need rudder, you aren't really doing a harrier roll because the nose would fall through in the knife edge. Practice on the sim has paid off a lot for me. Good luck!

Billa2.5D 05-21-2005 11:36 PM

RE: Harrier Rolls
 
Nothing to beat a sim. I am assuming you can do slow rolls and/or point rolls if you can do harrier rolls with just the elevator. I started out the same way but the roll rate has really got to be up there for the nose not to fall out. Slow down your roll rate and concentrate a lot more on using the rudder - the elevator will come automatically. I gave the same tip to a local flyer and he practiced it on his sim and now he is doing rolling harriers all the time. So the technique does work - hope it works for you too.

Daniel Z 05-22-2005 01:56 AM

RE: Harrier Rolls
 
yes, it can be done, but the attitude keeps much more clear when you use both, and you can do it slower, looks much like a pro


All times are GMT -8. The time now is 05:18 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.