Razzle 3D
 

Shoot me your addy via PM or Email and I'll get it out t you tomorrow....
No charge Pal,
Mike

Razzle 3D
 

Thanks to Mike Bogh, for mailing me his Razzle manual........I owe you a big favor Mike...thanks again....Gator

Razzle 3D
 

Glad to be able to help....send it back when your done. :rolleyes:

Razzle 3D
 

:eek: im amazed at the trouble that you guys have had with your razzle ive had mine for four months now and have had no trouble with anything about the plane

Re: Price
 

Hey texas3d, hope you receive it without any damage. Let us know when you receive your baby..........

Razzle 3D
 

texas3D's Razzle belongs to me now....I should be flying it by Monday.....G

Razzle 3D
 

I tend to fly extreem...maxed out control surfaces, full throw snaps...max everything.

If a planes got a weak spot inherent in it's design, or build process, I'll root it out every time.

Now that I'm done with the test process, the only weak spot is the horiz stab. The fix is a 1/4 in strip of carbon fiber ironed down the LE and TE both sides and wicked with thin CA.
Cost 3 bucks and a wee bit of covering.

Absoutly must do, if you fly like I do.

Razzle 3D
 

mike thanks for all the tips on the razz, we are surely enjoying ours. it's a great flyer and for the $ a bargain.

Razzle 3D
 

Hey, I've had mine for 3 months with an irvine 53 in it (lying around and wanted to fly the thing bad!) and reckon ill try another engine. Limit is about £180 ($291 today's rates.) Thatd have to cover the prop too. Could this get me a four stroke tha would be good for this plane? It'd be my first

Razzle 3D
 

grier
can you get a hold of an Irvine 72?...thats what I got on my Raz,,,flies it real nice....G

Razzle 3D
 

Yea, I like Irvine engines and four strokes are way out of the question so I might go for it. Will it hover with that engine or should i get an OS 91Fx its in my range too and has more power

Razzle 3D
 

heres mine hover'n with the irvine72

Razzle 3D
 

You ever going to get off your lazy behind and put that cowl on it Gator? :D

Looks much bedda cowled....

Razzle 3D
 

Heehee sweet, I could get the irvine and spend the rest on a plane =D! What prop are you using in that? The cowl makes it look pretty you know...

Razzle 3D
 

Hey guys, the razzle looks very tempting ! How does razzle compare to UCD, performance, quality of parts, and price wise ? Thanks

Razzle 3D
 

ah fudge...two min difference, you got me mike

Razzle 3D
 

Ahh your just a wee slow ya devil you!
:D:D

Razzle 3D
 

Ho ho! seconds difference..this isnt funny lol. The Razzle is a nice plane to fly, very aerobatic and fast with a high pitch prop on. Good value too compared to some others, i'd recommend it

Razzle 3D
 

This plane is a steal at $150.00 US.
Flys as good as the Ucan, Personally I like the looks better, (I know, opinions vary)
And flys much slower than the UCan.

Razzle 3D
 

also you need to beef up the tailwheel mounting area
I seen a guy rip his oout this past sunday and it was a good landing.
we looked at the area his had maybe 1/8" sheeting, if it were me
I'd add a inch or so piece of 1/8 ply then mount the tailwheel on it??

Razzle 3D
 

That's good advice Bob, I haven't ripped mine out but I can see that I might by dragging the tail through the grass in Harrier.
I did hit my tail with CA before I installed the T/W though....

Razzle 3D
 

I'm kinda hopeing I dont have it long enough to put the cowl on:D
Just kidding , its a good plane...I like it. Cant compare it with a UCD, but it flies alot like the FLIP3D....G

Razzle 3D
 

I have seen one of these using a satio 100. It hovers half throttle and has great pull out using a 15x6 APC. Plus the satio only weights 20.8 ounces.

Razzle 3D
 

I am running my razzle with a MDS 78 w/APC 14x8 prop on 5%. Ran three tanks through the engine before takeing her out to fly. The plane does not want to hover. Like its not pushing out enough power. I am still running the engine fairly rich, but could the prop be the problem? Should I get a higher pitch prop? Or do you think the engine needs some more fuel run through it before she will start pushing out some power.

Razzle 3D
 

I'd try a APC 13X4 W Jd, that will let the engine spool up quicker, and MDS's like to run on the upper RPM's.
You'll liie that prop I think...just be sure to ask for the "W", it stands for wide....