RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   3D Flying! (https://www.rcuniverse.com/forum/3d-flying-82/)
-   -   Plane for a Brison 2.4 ?? (https://www.rcuniverse.com/forum/3d-flying-82/7979473-plane-brison-2-4-a.html)

AJsToyz 09-22-2008 12:50 PM

Plane for a Brison 2.4 ??
 
I'm looking for a good plane for a Brison 2.4. It was on a CMP Extra 300 but the Extra has seen better days. looking for people that have similar or the same engine and what type of plane they have it on. Looking in the area of a Yak , Edge , Extra , not very particular.

Andy

nedyob 09-22-2008 06:47 PM

RE: Plane for a Brison 2.4 ??
 
The Wild Hare "Baby" Edge 540 will work with the 2.4 gas engine.
NEDYOB

badfish 09-23-2008 11:37 AM

RE: Plane for a Brison 2.4 ??
 
any of the Great Planes 27% planes. yak, extra330, cap, edge and the suk. also aeroworks makes 2 35cc planes extra 260 and a extra 300. horizon has the 260 also. just off the top of my head. I have the GP cap and the 2.4 pulls very well in it with a mej 20x8.

steve

AJsToyz 09-23-2008 03:04 PM

RE: Plane for a Brison 2.4 ??
 
I was looking at the GP but was not sure if my engine was to small. I'll look at Aeroworks , Horizon , and Wildhair.
I like the engine , I actually bought the engine/plane assembly for pretty cheap so the plane was not a loss. I was pulling out of a steep dive and the right aileron servo failed and everytime I tried to get it straight to pull up it rolled right. The plane was is repairable , but its not the best flying plane to start with so I'm not sure its worth the effort.

Andy

OCR99 09-23-2008 08:12 PM

RE: Plane for a Brison 2.4 ??
 
I am tkinking about a brison 2.4 for baby edge or something simular how is the vibration in brison compared to spe ect?anyone whit experiance or info on build

Rick

AJsToyz 09-23-2008 08:50 PM

RE: Plane for a Brison 2.4 ??
 
I don't have anything to compair it to , but it is a good running engine , and it didn't shake the extra.

Andy

badfish 09-24-2008 12:49 PM

RE: Plane for a Brison 2.4 ??
 
Others have mounted the 2.4 in WHs baby edge but IMO its waay too much overkill. the plane is designed around a 1.20 glow. It only has 960 sq inches on the wings. the others I mentioned average 1100- 1200 cubes. you need surface area when going gas. their heavier. I would go glow on the baby edge. probably os 160. for great power. the Brison does well up to 14lbs.

steve

OCR99 09-24-2008 01:10 PM

RE: Plane for a Brison 2.4 ??
 
I thought it might high stall speed trying to stay around 68" long to fit in van i was thinking about a 26 size but was afraid of not very goog pull out.
any planes you know of have aprox 1100 sg inch tha might work been doing a lot of reading lots to think about.

Rick

MIXMASTER 09-24-2008 02:23 PM

RE: Plane for a Brison 2.4 ??
 
I had a Brison 2.4 in a EF Giles, 74" wing if I remember right. It was around 12 lbs, a pretty good combo, it was always slobbering rich at the low end until I replaced the diaphram w/ that blue material and replaced the stock muffler. I think OMP carries the Giles too.

OCR99 09-24-2008 02:56 PM

RE: Plane for a Brison 2.4 ??
 
Also thought about mld 28 gasser alot lighter

Rick


All times are GMT -8. The time now is 05:15 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.