RCU Forums - aeroworks profile

RCU Forums (https://www.rcuniverse.com/forum/)

- 3D Flying! (https://www.rcuniverse.com/forum/3d-flying-82/)

- - aeroworks profile (https://www.rcuniverse.com/forum/3d-flying-82/802858-aeroworks-profile.html)

jasonc1354

05-25-2003 11:26 PM

aeroworks profile

can anyone tell me the correct range for the cg on this airplane. I can get the cg about 1 1/2 inches from the main spar with 1 bar of lead in the front. I am running a saito 180.

GarySS

05-27-2003 05:44 PM

aeroworks profile

My plans show the center of the drawn CG "bullseye" to be 5 3/8 inches from the very front of the wing's leading edge. The CG bullseye has about a 1/4 inch radius.

This is the plans-built kit not the new ARF.

All times are GMT -8. The time now is 08:19 PM.