aeroworks profile
05-25-2003 | 11:26 PM
#1
Thread Starter
Member
My Feedback: (7)
Joined: Oct 2002
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
From: LaVista,
NE
aeroworks profile
can anyone tell me the correct range for the cg on this airplane. I can get the cg about 1 1/2 inches from the main spar with 1 bar of lead in the front. I am running a saito 180.
05-27-2003 | 05:44 PM
#2
My Feedback: (13)
Joined: Apr 2002
Posts: 2,177
Likes: 0
Received 1 Like
on
1 Post
From: Center of the Flyover States,
aeroworks profile
My plans show the center of the drawn CG "bullseye" to be 5 3/8 inches from the very front of the wing's leading edge. The CG bullseye has about a 1/4 inch radius.
This is the plans-built kit not the new ARF.
This is the plans-built kit not the new ARF.
