Average Pro Cap weight?
01-22-2006 | 12:40 PM
#1
Thread Starter
Senior Member
My Feedback: (2)
Joined: Jul 2002
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
From: Granite Falls,
NC
Average Pro Cap weight?
I was hoping to be under 12 oz. It came out 12 3/4 oz ready to fly with a 640 mA. With the TP 1320 mA she's 13 3/4 oz.
I feel it could have been lighter, but I re-enforced it with some carbon stuts and ABS plastic strips for field flying/landing...
Here she is [8D]
I feel it could have been lighter, but I re-enforced it with some carbon stuts and ABS plastic strips for field flying/landing...
Here she is [8D]
02-04-2006 | 09:09 PM
#5
Thread Starter
Senior Member
My Feedback: (2)
Joined: Jul 2002
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
From: Granite Falls,
NC
RE: Average Pro Cap weight?
Well I flew it shortly after the build. I was able to put one flight on it before handing it over to its owner [:@]
The test flight was as if it had already been flown... After giving it a just a few clicks of down elevator, and 2 clicks to the right to plane was near perfect. Inverted was also near level flight. This plane flies SLOW, and hovers effortlessly
The test flight was as if it had already been flown... After giving it a just a few clicks of down elevator, and 2 clicks to the right to plane was near perfect. Inverted was also near level flight. This plane flies SLOW, and hovers effortlessly
