depron ca
 

Could someone tell me what ca works on depron foam? (flat out aircraft)

RE: depron ca
 

On www.3dfoamy.com aircraft I use foam safe CA, Id assume it would be the same for yours.

RE: depron ca
 

I tried foam safe ca but didnt set up , im wondering if an accelerate would help

RE: depron ca
 

I've found the same problem. I used a "Foam safe" CA from my LHS and it worked great with an accelerator. Several guys have told me that if the CA has no odor then it should be safe on foam. The problem I find with Depron is the covering that is placed over the sheets. If I peel this off any foam safe CA seems to work.

RE: depron ca
 

You can also safely use "low temp" hot-melt glue or epoxy.

RE: depron ca
 

Best glue I have found for Depron, FFF and cellfoam88 is Gorilla glue and gorilla fast glue

RE: depron ca
 

I use BS super gold plus...with accelerator. works great...very strong. during my initial build of the super xtra I used just plain Elmers white glue...tape the parts and wait...very good. 3M spray adhesive works very well too...only get one chance here.

I've heard great things about gorilla glue...they make a super glue now. haven't tried it but from what I've heard it works very well