RCU Forums - View Single Post - Rogue 3D Bipe
View Single Post
Old 03-06-2006 | 08:55 PM
  #6  
gmilo
My Feedback: (39)
 
Joined: Aug 2005
Posts: 105
Received 7 Likes on 5 Posts
From: Alamo, CA
Default RE: Rogue 3D Bipe

Just finished building mine. I'll post some pictures with some mods I adopted. Setup is:

Hacker A30-16M
X-30 controller
APC 11x5.5E prop
TP 2100 Prolite
HS-56 servos all around

AUW is 29 ounces. If it flies heavy (I've heard it flies great at this weight and with this setup), I'll back-off to a TP1320 prolite pack to move the AUW back to 27 ounces and fly with appropriate throttle management to control the amp draw within the packs limitations and/or prop down to a 10x4.7SW

Hope this helps

Greg